Bracket Oil Lamp provides an alternative light source when the power goes out. Swing arm bracket is secured to the wall, enabling lamp to rotate from side to side. Useful in dark areas and corners where light adjustment is often needed.
Lamp arm and support are made of sturdy cast iron, finished black. Lamp shade is hand painted with blue roses. Font is white glass with embossed edge. Glass chimney is clear glass. Mounts to wall at a desired location. Arm can be readily shifted to best position. Bracket oil lamp burns approximately 0.5 ounces of lamp-oil per hour.
Oil Lamp Guide
Only use "lamp oil" as a fuel source. Other oil types can cause fires and/or damage oil burners.
Leave at least a ½ inch of head-space when filling up your oil lamp.
Keep lamp reservoir half full so that wick stays properly saturated
Oil lamps burn approximately ½ ounce of lamp oil per hour.
Trim off charred edge of wick after every couple uses. If charred residue is not kept trimmed, wick will likely smoke and provide dim light.
Replace lamp chimney once lamp is lit to protect flame from drafts.
Oil lamps are only for indoor use.
Caution: A burning oil lamp should not be left unattended. Lamps should be placed out of the reach of children.
Install Bracket Oil Lamp
Determine placement of wall lamp
Oil lamp should-not be positioned near any combustible source
Heat must have space to escape lamp chimney
Lamp hangs from matching support-bracket
Support-bracket is attached by 2 screws
When installing be sure to screw bracket to a wall-stud
Once attached to wall, slide post on end of lamp-arm into support-bracket.
Pour lamp oil into font
Screw oil-lamp-burner into glass lamp font.
Place font in bowl-shaped area of lamp bracket
Position chimney on burner so that tines hold chimney in place