Vintage Rosette Pulls

Rosette Furniture Handles

• Sold each
• Material: Brass
• Finish: Polished & Lacquered
• Mounting screws included

• 3" Boring
• Overall: 4" Wide x 2-1/4" High
• Rosette Diameter: 1-1/4" 

Vintage Rosette Pulls have a larger than normal rosette. This large size 1-1/4" rosette is useful in covering scarring left by previous hardware. Stylish bail handle adds interest to this bail pull. Bail Pulls have two posts with attached rosettes and a bail handle. Bail handle swings from rosettes with posts. Rosette pulls are brass with a polished & lacquered finish. 

Measure & Install Rosette Pulls

• Boring: distance between center of mounting hole to center of adjacent mounting hole.
  
• If replacing handles:  replacement-handle-boring must match actual boring measurement in drawer.
• Overall Size: width and height of handle at widest point.

Attaching Bail Pulls

• Place one rosette with post, on drawer front at mounting hole.  Insert screw, from drawer interior, through mounting hole and screw into back of post (do-not tighten).  
• Insert bail in mounted post. Add second rosette with post, to other end of bail.
• Insert 2nd screw, from drawer interior, through 2nd mounting hole and screw into back of second rosette with post. 
• Once together and in place, tighten screws.
• Bail Handles are secured using 8-32 machine screws. Length supplied is determined by manufacturer. While supplied screw length is generally useful, occasionally a different size is required. Please let us know if you need a specific length. To determine the correct size: measure wood thickness and add 1/4".