Antique Furniture Locks, medium - hinged left

Half Mortise Locks for Drawers & Doors hinged on Left

Backset- Distance To Pin: 11/16" (17 mm) Overall: 3" x 1-1/2" (76 mm x 38 mm) Selvedge: 7/16" x 3" Bolt Projection: 5/16" Key size: Barrel: 1/4" x 1-5/8", 2-1/8" Overall Length, Key-bit Height: 7/16" Both left & right locks of same size are keyed alike.

We recommend reading: Selecting and replacing half mortise locks. more of this Furniture Lock Opposite Lock, Drawer or Door hinged right Backset 1/2", Drawer or Door-hinged-left Backset 1/2", Drawer or Door-hinged-right Keyhole Covers Keyhole-covers not-included as furniture style dictates design #0242,#0237, #0253 fit this lock Many sizes of locks were made years ago, only a few sizes are currently made.

Antique Furniture Locks are a traditional half mortise design. They are great replacement locks due to their size, authentic appearance and quality construction. These locks have a brass face plate with steel box and brass bolt. Lever mechanism provides easy access with the turn of a key. This classic style is a half mortise type. It is used on both drawers and doors. Standing the test of time, this design has been used on furniture for a couple hundred years. Made in England.

Install Considerations

1. Strikes were rarely used with half mortise locks. Typically wood is notched to accept bolt. However if preferred a generic #4521 strike is available separately.
2. When using on doors: select according to side door is hinged on. This lock is for cabinet doors hinged on left.
3. When using on drawers: Keyholes are off-center requiring lock to be positioned accordingly.
4. Lock installs into a partial cut out in furniture. In closed position, lock is not seen.

If replacing a lock: the backset measurement must be determined

• If you have original lock: measure distance between top edge of lock to lock pin in center of keyhole. This measurement is known as the backset.
• If old lock not available, determine backset by measuring: distance from center of keyhole (where lock pin will be) to top edge of drawer or side edge of door.
• The backset measurement of the replacement lock, must match backset measurement in original lock and/or keyhole location measurement in drawer or cabinet door.