Drop Leaf Hinges, 1-1/4 x 2-7/8

Vintage Table Hardware

Drop Leaf Table Hinges are a reproduction style seen on many antique tables. This hard working vintage table hardware is steel with a fixed pin and countersunk holes. These hinges are unique with barrel protruding on one side when hinge is closed. This style is know as a rule joint. Hinge-leaves are 2 different lengths. If needed use with steel drop leaf table supports.

Drop Leaf Table Hinges Joint Length: 1-1/4" Open Width: 2-7/8" Long Leaf Including Pin: 1-3/4" Short Leaf to Pin: 1-1/8" Screw size: #6

Smaller matching Hinge 1-1/2 x 3-3/16 Table Hinge

Install Table Hinges

• The rule joint protrudes on only one side of hinge. This joint is mortised into the underside of the table top, thus enabling leaf to swing clear.
• The hinge leaves are intentionally two lengths. The shorter hinge leaf is mortised into the underside of tabletop. The longer hinge leaf is mortised into the underside of table leaf..