Item # 2643

Gold Lamp Cord with Plug & In-line Switch

$5.76
$5.76
$0
Sold out
Quantity must be 1 or more

Shipping to USA

Shipping to International locations

Lamp Wire with Inline Switch & Plug

Clear Gold Lamp Cord Set is a great compliment for brass and copper lamps. Convenient in-line switch provides easy access to light. This easy to use style simplifies lamp rewiring as plug is already attached and copper-tipped ends are easy to maneuver around screws on lamp socket interior.

Clear Gold Lamp Cord Set with Cord Switch

  • Type: SPT-2
  • Length: 8 ft
  • Wire: 18/2
  • Rotary On/Off Cord Switch
  • Polarized plug
  • U.L., C.S.A.

more Gold Cord options

SPT refers to the amount of plastic insulation covering the lamp wire:

  • SPT-1 is the traditional thickness of 0.3" plastic insulation. It easily slips standard 3/8" lamp pipe.
  • SPT-2 is thicker with a 0.45" plastic insulation providing more protection and resistant to abrasion. Slipping SPT-2 wire through 3/8" - 1/8 IP lamp pipe can be tight.
  • 18 gauge: 2 parallel stranded copper wires with standard SPT-2 plastic insulation.
  • The smooth plastic covered side is positive/hot. Whereas the opposite side with slight ribs in plastic covering is neutral/negative.
  • Approximate cord size: 3/16" width x 1/4" thickness
  • U.L. Listed for table & floor lamps were cord is exposed.
  • Stripped, copper-tipped ends simplify wrapping wire around socket screws.
  • Molded-on plugs are polarized and permanently attached to lamp cord.

Before making any changes to electrical fixtures and/or lamps:

  • Disconnect plug/wire from the electrical source.
  • Turning lamp off will not protect you from electric shock.
  • If you are unsure how to safely proceed contact a licensed electrician.
Go to full site