Old Style Furniture Casters, Small

Vintage Furniture Wheels - Plate Type

Old Style Brass Casters are an early style from the mid 1800's. This type was primarily used on table and chair legs.

Wheel Diameter: 1" Wheel Width: 5/8" Raises Furniture: 1-1/2" Plate Diameter: 1-1/8" x 1/16" Thick Stem: 7/16" Diameter x 3/4" Height Load capacity: 200 pounds per caster

Unique Antique Type Replace all casters to insure uniform height, style & appearance. Matching Brass Casters 3/4" Wheel 1" Wheel Antique Finish Casters 3/4" Wheel Caster 3/4" Wheel Caster

These are reproduction old style brass casters. Each is solid brass crafted from substantial castings. Finish is polished, it is not lacquered and will age over time. Old style brass casters are defined by the short and thick stem. Caster swivels at swivel-joint between fork and leg plate.

Install Casters

Load Capacity, caster strength and stability is directly related to correct installation. If a caster is incorrectly installed it will-not be strong or serviceable.

• Old-style thick stem requires larger mounting hole than standard casters. It must fit tightly into drilled hole, in furniture leg, with as little play as possible.
• Round caster-plate adds additional support under furniture leg. Attach with 3 wood screws.
• Please see: Installing plate type casters for more information