Retro Corner Post

Brass Railing Corner Post

Overall Height: 2-15/16" Top Diameter: 1" Height to Top of Rail: 2-5/8" Post Diameter: 3/8" Base Diameter: 1-1/4" 3 Screw holes in base Screw size: #4 x 1/2" Rod Hole: for ¼” Diameter Rod

** See: GUIDE for matching posts, rod and layout tips.** Matching Retro Posts End Post Center Post Wall Mount Post Brass Railing Rod 36" Length Rod 72" Length Rod ** See bottom of page for install information .**

Brass Retro Corner Posts are used to create a brass railing with a 21st century look. Use posts in corner locations. Post enables 2 rods to be inserted into at 90 ° angle.

Retro Post are raw unfinished - solid brass. See link above for additional information. These post can be polished and lacquered for a long lasting shine or left to age naturally. If preferred, the brass can be colored using various procedures. Although we do-not offer this option, if you search online there are various brass coloring techniques and solutions available.

Install on Wood Surface:

Attach to surface top with wood screws:

• Layout brass railing
• Cut rods to appropriate lengths
• Loosely assemble rods and posts
  
• Mark screw location and drill necessary pilot holes for brass screws
• Slip rods in place.
• Insert brass screws through holes in base of posts. Carefully screw them down into pre drilled holes.