Item # 2281K

2-Light Swivel Lamp Socket Cluster

$41.46
$41.46
$0
Sold out
Quantity must be 1 or more

Shipping to USA

Shipping to International locations

Swivel Light Socket Cluster

2-Light Swivel Lamp Socket Cluster for table and floor lamps. It has two lamp sockets. Each is controlled individually, enabling one or both sockets to be lit. Pull chains provide easy accessibility to switching light on or off. Use on

Lamp Socket Cluster

  • Un-wired
  • Wiring requires two single wires for each socket (included) and a lamp cord (not included)
  • Sockets: E-26 medium base
  • Adjustable Stem: 3-1/2" - 6"
  • Width: 4-1/2"
  • Base of Center Stem screws onto 1/8IP - 3/8" pipe, if this size is too small bushing in base can be removed, it will then screw onto 1/4IP - 1/2" pipe.
  • U.L. Listed
  • Use with E26 - medium base 3-way light bulbs

more Light Socket Clusters

Cluster base screws onto 1/8 IP - 3/8" standard lamp pipe. If needed, reducer in base can be removed, enabling cluster base to screw onto 1/4IP - 1/2" standard lamp pipe. Sockets can be swiveled to various positions for best lighting. Top is adjustable, allowing height of lampshade to be raised or lowered.

Before making any changes to electrical fixtures and/or lamps:

  • Disconnect plug/wire from the electrical source.
  • Turning lamp off will not protect you from electric shock.
  • If you are unsure how to safely proceed contact a licensed electrician.
Go to full site