Item # 2642

White Lamp Cord with In-line Switch & Plug

Regular price
$7.14
Sale price
$7.14
Regular price
$0
Sold out
Unit price
Quantity must be 1 or more

Lamp Wire with Inline Switch & Plug

White Lamp Cord Set is a traditional color seen on many porcelain, marble and glass lamps. It is a good choice when used against white or light colored walls. Convenient cord switch provide easy access. This simple to use style simplifies lamp rewiring as plug is already attached and copper-tipped ends are easy to maneuver around screws on lamp socket interior.

White Lamp Cord Set

  • Type: SPT-2
  • Length: 8 ft
  • Wire: 18/2
  • Polarized plug
  • U.L., C.S.A.

more White Lamp Cord options

SPT refers to the amount of plastic insulation covering the lamp wire:

  • SPT-1 is the traditional thickness of 0.3" plastic insulation. It easily slips standard 3/8" lamp pipe.
  • SPT-2 is thicker with a 0.45" plastic insulation providing more protection and resistant to abrasion. Slipping SPT-2 wire through 3/8" - 1/8 IP lamp pipe can be tight.
  • 18 gauge: 2 parallel stranded copper wires with standard SPT-2 plastic insulation.
  • The smooth plastic covered side is positive/hot. Whereas the opposite side with slight ribs in plastic covering is neutral/negative.
  • Approximate cord size: 3/16" width x 1/4" thickness
  • U.L. Listed for table & floor lamps were cord is exposed.
  • Stripped, copper-tipped ends simplify wrapping wire around socket screws.
  • Molded-on plugs are polarized and permanently attached to lamp cord.

Before making any changes to electrical fixtures and/or lamps:

  • Disconnect plug/wire from the electrical source.
  • Turning lamp off will not protect you from electric shock.
  • If you are unsure how to safely proceed contact a licensed electrician.
Go to full site