Product image 1
Item # 2648

White Lamp Cords with Plugs, 8 Foot SPT2

$5.76
$5.76
$0
Sold out
Quantity must be 1 or more

Shipping to USA

Shipping to International locations

Lamp Wire with Plug

Industry Standard

  • Type: #18/2
  • SPT-2
  • 8 ft length
  • Polarized plug
  • U.L., C.S.A.
More White Lamp Cord Sets
SPT refers to the amount of plastic insulation covering the lamp wire:
  • SPT-1 is the traditional thickness of 0.3" plastic insulation. It easily slips standard 3/8" lamp pipe.
  • SPT-2 is thicker with a 0.45" plastic insulation providing more protection and resistant to abrasion. Slipping SPT-2 wire through 3/8" - 1/8 IP lamp pipe can be tight.

White Lamp Cord Sets are very traditional. They are a good choice when used against white or light colored walls.

  • Standard insulated 18 gauge twin wire has 2 parallel copper wires. Wire with smooth plastic covering is positive/hot, wire with slight ribs in plastic is neutral/negative.
  • Approximate cord size: 3/16" width x 1/4" thickness
  • U.L. Listed for table & floor lamps were cord is exposed.
  • Stripped, copper-tipped ends simplify wrapping wire around socket screws.
  • Molded-on plugs are polarized and permanently attached to lamp cord.

Before making any changes to electrical fixtures and/or lamps:

  • Disconnect plug/wire from the electrical source.
  • Turning lamp off will not protect you from electric shock.
  • If you are unsure how to safely proceed contact a licensed electrician
Go to full site