Approximate cord size: 3/16" width x 1/4" thickness
SPT-2 Plastic insulation 0.45"
18/2, 18 gauge, 105°
White SPT-2 Lamp Cord with Plug & In-line Switch is a convenient option when rewiring lamps as socket is easily switched off-on from lamp cord. Use with a keyless socket. Standard insulated 18 gauge wire has 2 parallel copper wires. The positive/hot is smooth, neutral/negative - has ribs. U.L. Listed for table & floor lamps were cord is exposed. Stripped, copper-tipped ends simplify wrapping wire around socket screws. Molded-on plugs are polarized and permanently attached to lamp cord. SPT-2 rating has thicker plastic insulation, see below.
The thickness-rating provides varying degrees of resistance to heat and abrasion. Higher SPT rating numbers provide more resistance to abrasion and more protection from electric shock.
SPT-2has a thicker plastic coating than traditional SPT-1 lamp cord. The thicker plastic provides more protection from electric shock and additional resistant to abrasion. Designed for table & floor lamps. Can be tight when slipping 3/8" - 1/8 IP lamp pipe.
Before making any changes to electrical fixtures and/or lamps:
Disconnect plug/wire from the electrical source.
Turning lamp off will not protect you from electric shock.
If you are unsure how to safely proceed contact a licensed electrician