Brass Furniture Casters, wheel 1-1/4 inch

Brass Furniture Casters

Caster selection is based upon: weight capacity,
mounting type, height caster will raise furniture, scale and appearance

• Wheel Diameter: 1-1/4"
• Wheel Width: 1/2"
• Raises Furniture: 1-1/2"
• Plate Diameter: 1-1/8" x 1/8" Thick
• Stem: 1/4" Diameter x 1" Height
• Load capacity: 200 pounds per caster
• If updating vintage furniture, replace all casters. This insures uniform height, style & appearance.
  
  

These premium casters are expertly made from substantial brass castings. Each is solid offering exceptional strength and load-bearing capability. Caster swivels at swivel-joint between fork and leg plate. The brass resists corrosion. The brass is polished but not lacquered. Overtime it will develop a pleasing patina.

Install Plate Type Caster on Wood Furniture

• Casters should be installed perpendicular to the floor.
• Drill hole, depth of steel drive stem and a hair smaller than 1/4" stem diameter so that caster stem fits snuggly.
• Gently tap threaded drive stem up into leg. Stem should fit snug but not tight, in hole.
• Outside diameter of mounting plate should not be larger than furniture leg diameter. Mark location of plate screw holes in bottom of leg.
• Remove caster. Pre-drill pilot holes for brass screws.
• Insert caster stem back up into leg.
• Attach caster plate to bottom of furniture leg with screws. Stem keeps caster from wobbling. Screws hold caster to furniture leg

Load Capacity, caster strength and stability is directly related to correct installation. If a caster is incorrectly installed it will-not be strong or serviceable.