Curved Bail Handles, Antique Brass

Rosette Drawer Pulls

Curved Brass Bail Handles were a common style used on Victorian and American Oak furniture. This classic design was during the late 19th and early 20th centuries. These authentic replicas are a nice choice where a simple style is preferred. Darkened appearance compliments oak furniture.

Curved Bail Handles 3" boring 3-5/8" handle-width, widest point Overall: 4-1/2" x 2-1/4" Eyebolt Shank Length: 1"

When replacing existing handles always check boring-measurement

These rosette drawer pulls are brass with a darkened aged finish. Simple curved handle has contoured shape that bows outward in center. Bail handle is supported by two brass plated eyebolts. The eyebolt shank that goes through the wood is 1" in length.

Measure Victorian Dresser Pulls

• Boring is the space between center of mounting hole to center of adjacent mounting hole. If changing handles, on existing drawers, this measurement is  crucial.
• There is considerable more flexibility if installing handles on new furniture or cabinets. Mounting holes can be drilled where needed for new installations.
• Overall Size reflects: width and height of handle at widest point. Ideally a balanced relationship between drawer handle and drawer is best.

Install Victorian Drawer Pulls

• Handle attaches to drawer with two eye bolts.
• To Install: start from drawer front.
• Insert eyebolts through holes in rosettes, front to back. Eyebolt shank length is 1", if too short counter sink eyebolt-nut in wood. 
  
• Continue inserting post through holes in drawer, allowing posts to be loosely positioned.
• Position handle and insert handle-ends into 2 eyebolts.
• Push eyebolts with handle into place.
• From drawer interior, screw nuts on bolts and tighten.