Brass Cylinder Hinges, 12mm

Brass Cylinder Hinges are useful barrel hinges for flush inset applications such as small cabinet inset doors and lift lid boxes. Use on wood 5/8" thick. Hinge opens to 180 degrees.

Brass Cylinder Hinges

• For 5/8" Wood Thickness
• 12mm Diameter
• 1-1/16" Closed Length
• Opens to 180 degrees

Cylinder hinges are brass with heavy gauge brass plated steel linkage

Install Barrel Hinge

Easy to install, simply drill hole the exact diameter of the hinge, insert the hinge and adjust the wedge-tightening screw. These hinges are not intended for load bearing applications. Once installed hinges provide an invisible appearance. Choose from three sizes according to your wood thickness.

• Marked center line, in each direction, with a square to locate center
• Drill holes using exact diameter of hinge and exact depth of hinge (do not use oversize drill bits) Use 12 mm metric bit for 12 mm diameter
• Insert hinge-barrel into each hole. Simultaneously press hinge-barrel into each section. Gradually open and close, making small corrections as needed to ensure hinge is straight and not twisted. Should be flush with surface once in place.
• Tightening the set screw expands the special built in wedge action providing a secure application.