Brass Gallery Rail - Corner Posts

Gallery Post for Brass Railing

• Sold each
• Material: Brass
• Finish: Natural Unfinished, not-lacquered
• Machine Screws included
  

• Post Height: 2-1/8"
• Post Base-diameter: 7/8", screw-hole diameter: 11/64"
• Accepts ¼” Diameter Rod

Sold Out - Expected Early August

Corner Posts for Gallery Rail enable rods to insert post at 90 ° angle. Posts are unfinished - solid brass with a natural finish. See bottom of page for install information

Gallery Rail Posts 

• End Post
• Center Post
• Wall-mount Post - Matching
• Wall Mount Post - Low Profile

Brass Rod for Gallery Railing

• 36" Brass Rod for Gallery 
• 72" Brass Rod for Gallery 

Install: 2 attachment methods for Railing Posts

Machine-Screw Attachment Method

Best and easiest attachment method. Machine screw inserts through hole from underneath mounting surface and screws into bottom of post. Machine screws included.

• Drill hole through wood surface, insert screws from underneath of surface, through hole and thread into bottom of post.
• The gallery rail can be used on stone such as marble or granite provided holes are predrilled at post locations. Machine screws are inserted from under-side of stone, through hole and into base of post.

Adapter-Screw Attachment Method:

Post screws down from top onto wood surface 3/8". This installation method can be more difficult, requiring extra manipulation of rod and post head when inserting rod. This installation cannot be used on stone surfaces.

• Install all posts and rods which fit easily.
• Tight fitting rods require extra attention: Cut rod slightly short. Slide rod into post. As rod is slightly short, additional clearance will be achieved when rod is slid into post.  This added clearance provides space to insert rod into last post. If necessary: top of post can be slightly turned and rod can be gingerly bent to fit into post.