Half Mortise Jewelry Box Locks

Half Mortise Box Locks

Lock Size Backset-Distance To Pin: 7/16", 11 mm Overall:1-3/4" x 11/16" Selvedge: 3/16" x 1-3/4" Key size: 1-1/4" Overall Length, Barrel: 3/16" x 11/16", Key-bit Height: 3/16" Use with wood thicknesses of less than 11/16" Insert Escutcheon: #0241 can be used with this lock Link to additional jewelry box lock below

Finding an exact match for an old lock is not always possible, as only a limited amount of sizes are now  made.

Jewelry Box Locks are a brass half mortise style. This style was used on many antique jewelry boxes. The small scale is also choice for little boxes, game chests and silver cases.

These beautifully crafted half-mortise locks are hardworking, made with a German-mechanism. When installing: mortise lock into box interior. Once in place, simple brass plate is all that is seen. Attach strike to underside of lift lid. Center-post of strike drops down into top of lock, when closing lid, to secure box. Made in Germany

Additional Jewelry Box Locks

• 1/2" backset Box Lock

Replacing Jewelry Box Locks

Keyhole location measurement is critical.Replacement lock-keyhole-location must match location of keyhole in furniture.

To measure: easiest to measure old lock, if you have it:

• Lock Keyhole Location: distance between selvedge-edge - where bolt shoots through, to lock pin. This measurement is known as the backset.
• Furniture Keyhole Cutout Location: distance between furniture-edge to estimated location of lock pin in furniture keyhole.

For help measuring and selecting antique furniture locks, we recommend reading: What you need to know about selecting and replacing half mortise locks.