Old Style Brass Casters, Small

Plate Caster

• Sold individually
• Material: Brass
• Finish: Polished
• Plate: 3 Screw Holes
• Mounting screws included

• Wheel: 1" Diameter
• Raises Furniture: 1-1/4"
• Stem: 7/16" Diameter, 3/4" Height
• Plate:1-1/8" Diameter, 1/16" Thick
• Load capacity: 200 pounds per caster

Old Style Brass Casters are an early style from the mid 1800's. This type was primarily used on table and chair legs.

These are reproduction old style brass casters. Each is solid brass crafted from substantial castings.  Finish is polished, it is not lacquered and will age over time.  Old style brass casters are defined by the short and thick stem.  Caster swivels at swivel-joint between fork and leg plate.

Additional Brass Casters

• 3/4" Wheel Caster 

Measure Plate-type Casters

• Wheel diameter: diameter of caster wheel
• Raises Furniture: is the height the furniture will be raised above the floor
• Caster Stem:  measured diameter x height. 
• Caster Plate: is a circular plate, with 3-4 screw holes, helps support furniture leg.

Install Casters

Load Capacity, caster strength and stability is directly related to correct installation. If a caster is incorrectly installed it will-not be strong or serviceable.

• Old-style thick stem requires larger mounting hole than standard casters. It must fit tightly into drilled hole, in furniture leg, with as little play as possible.
• Round caster-plate adds additional support under furniture leg. Attach with 3 wood screws.
• Please see:Installing plate type casters for more information
  

If furniture has missing or damaged casters: Replace all casters to insure uniform  height, style and appearance.