Table Lampshade Coastal Birds, 14 inch

Harp Lamp Shade

Ships Free to contiguous 48 US states

Size

• Fitter type: Harp
• Typically used on lamp bases 10" or taller
• 14" Bottom, Point to Point
• 9-1/2" Top, Point to Point
• 9" Side

Stunning Table Lampshade beautifully depicts costal shore birds in their natural habitat.  The vivid colors brighten rooms complementing both old and new homes. Use on table lamps with a lamp harp.

Our Parchment Lampshades are both beautiful and unique. These lampshades are very difficult to make. Each requires skillful craftsmanship, attention to detail and many hours of handwork to create.   First parchment paper is stabilized with hard white buckram, a coarse linen lining that provides added strength to each lampshade panel. Exterior of the sturdy, hand-crafted, rust resistant metal frame is then wrapped with parchment. Once assembled gold taped binding completes lamp shade, defining top bottom and individual sections. Made in America

These vintage style lampshades have been a favorite for more than 60 years. They offer  individuality and lasting elegance. They have been a favorite for generations.

More Bird Lampshades

• Uno Bridge Lampshade
  
  
• Large Floor Lampshade

Measure Harp Lamp Shades

Standardized Lamp Shades Measurements

• Top: diameter across top of shade
• Bottom:  diameter across base of shade
• Side: straight measurement of the slant-side of shade

A small 1/2" ring fitter is at center top of a harp lamp shade frame. This ring sits on post at top of harp and is secured by a lamp finial. 

Guidelines for determining which Harp Lamp Shade to select

These generalizations apply to many lamps however personal taste should be the guiding influence. 

• Height of Lamp Shade: approximately 2/3 rds height of lamp-base. (height of lamp base: distance from bottom of lamp base to base of lamp socket)
• Bottom-diameter of Lamp Shade: approximately 1”-2” less than lamp-base height. Bottom diameter should not exceed lamp-base height. 
• 
  
• Lamp shade proportions should reflect lamp base proportions. For example: a short squat lamp will look best with a shade of similar proportions.
• Using the same lamp shade base shape, round or square, provides a cohesive appearance.
• If using incandescent light bulbs there should be a minimum of 3-1/2” between lamp shade and bulb to allow heat escape.
• If the preferred lampshade size is not available, it is normally best to choose a slightly larger rather than smaller size shade.
• Change harp height if the lampshade is sitting too high or low on the lamp.