Victorian Handles for Drawers

Victorian Drawer Handles have a delicate open-work design. This pull exhibits intricate details, epitomizing late 19th century styles. Use on Victorian furniture.

Victorian Handles for Drawers 3" Center Hole to Center Hole Overall Width: 3-7/8" Overall Height: 2-1/8" Eyebolt Shank Length: 1" matching Antique Finish Handles

If replacing drawer handles, check distance between holes

These drawer pulls are authentically produced. Each is cast brass. Finish is polished, not lacquered. These handles are not recommended for serpentine drawers as cast backplate and handle will-not bend

Measure Victorian Drawer Handles

• Boring is the space between center of mounting hole to center of adjacent mounting hole. If changing handles, on existing drawers, this measurement is crucial.
• There is considerable more flexibility if installing handles on new furniture or cabinets. Mounting holes can be drilled where needed for new installations.
• Overall Size reflects: width and height of handle at widest point. Ideally a balanced relationship between drawer handle and drawer is best.

Install Victorian Drawer Pulls

• Handle attaches to drawer with two eye bolts.
• To Install: start from drawer front.
• Insert eyebolts through holes in backplate, front to back. Eyebolt shank length is 1", if too short counter sink eyebolt-nut in wood. 
• Continue inserting post through holes in drawer, allowing posts to be loosely positioned.
• Position handle and insert handle-ends into 2 eyebolts.
• Push eyebolts with handle into place.
• From drawer interior, screw nuts on bolts and tighten.