Wood Swivel Wheel Casters, 1-1/4 inch roller

Small Wood Swivel Wheel Casters are most often used on late 19th and early 20th century furniture. Old appearance adds vintage appeal to antiques. These ball bearing casters minimize friction, enhancing maneuverability and extending durability. They deliver smooth and quiet performance, suitable for light to medium weight applications rolling on carpet and hard floors. 

Wood Swivel Wheel Casters

• Wheel Diameter: 1-1/4"
• Raises Furniture 1-3/4"
• Stem: 1/4" diameter x 1-3/8" High
• Sleeve: 3/4" Base x1-1/4" High
• Load capacity: 200 pounds per caster
• Ball bearing swivel mechanism

If updating vintage furniture, replace all casters. This insures uniform height, style & appearance.

This furniture caster has a wood wheel, steel stem, ball bearing plate and grip neck sleeve.  Ball bearing swivel assembly enables caster to swivel independently of caster fork. Wheel is hardwood with a walnut stain. Sleeve has 3/4″ track plate for secure grip.

Install Grip Neck Casters

• Casters should be installed perpendicular to the floor.
• Drill hole: 3/8" x 1 5/8"  in bottom of furniture leg. Insert caster-sleeve. Gently tap in place,.so that teeth permeate wood.
• Older furniture may have old caster-sleeve still in place. New replacement wood wheel casters may or may-not snap into old sleeves. Old sleeves can be removed and replaced with new sleeves. (see bottom of page)
• Once caster-sleeve is in place: push caster-stem into sleeve until it snaps into place.
• For smooth mobility and serviceable action casters must be properly installed.
• A note about restorations: mixing old and new casters, on one piece of furniture, rarely provides an acceptable outcome.