Table Leaf Forks

Brass Table Keepers

Sturdy Brass Table Leaf Forks hold two table-top-sections firmly together and provide a leveling action for the two adjoining sections. These unique assemblies are also referred to as: table yokes, table keepers and table clamps. Call them what you want, they are any easy to use option for joining table-tops. 

Table Leaf Forks Fork Size Overall Width: 2-7/8" Center to center: 2-3/8" Finger Pull Depth: 5/8" Depth: 2" Tine Width: 7/16" x 3/32" Thick Sleeve Size Width: 1-1/4" Thickness: 3/8" Depth: 1"

Level and securely hold two table sections together Replacing old table forks: Please measure carefully, as not all previously made table keepers are this exact size.

Each assembly is made from strong brass extrusions. Sleeves are spring loaded for a tight, secure fit. Finish is polished, It is not lacquered and will age over time.

Install Brass Table Keepers

• Use two table fork assemblies when joining two table sections together.
• The two forks will be used opposite each other on under side of table top.
• Mark install location of sleeves with yokes on underside to table sections. Once installed, table yokes should equally straddle joint between the two table sections, when they are together. 
• Finger-pull portion of fork should be slightly inset from outer edge of table top.
• Pre-drill pilot holes. Also it is best to screw a steel-screw into each hole, before actually inserting brass screws.
• Once sleeves are installed: slide Fork into sleeves. It will help level table surface and hold sections tightly together.