Cheval Mirror Screws, Polished

Mirror Hardware

• Sold per pair.
  
• One pair hangs one mirror
• Bow, Spacer, Bushing Material: Brass
• Finish: Polished & lacquered
• Stem Material: Steel

• Bow-end: 1-5/16" x 1"
  
• Stem: 2-1/2" Length, 1/4" Diameter
• Stem Thread size: 1/4-20
• Spacer: 5/8" diameter, 1/4" thick
• Insert Bushing: 3/8" body diameter, 9/16" head diameter, 5/8" overall length

Cheval Mirror Screws  enable large mirrors to hang and swing from two standards. Decorative ends are polished brass. Mirror is easily tilted to various angled or straight positions.*

Decorative bow-ends and thread inserts are brass. Finish is polished brass. Unlike others, these Cheval mirror screws have smooth steel stems with threaded ends. The smooth steel portion is an advantage as it won't abrade mirror frame. 

Install Cheval Mirror Screws

• Determine mirror screw placement. Typically 3"-4" above center height of cheval mirror.
• Drill 3/8" hole in each side-end of mirror frame.  Depth of hole must be deep enough to allow stem to protrude past insert. Screw insert busing into hole.
• Drill 9/32" hole, through each side-standard,  at hanging location.  Allow clearance space between bottom of mirror and standard base. 
• Insert steel stem through standard, through spacer and into insert-bushing. Stem can be cut to shorter length if needed.
• Screw stem into insert in mirror. Carefully tighten so as not to crack mirror.
• Adjust mirror to preferred position