Retro End Post

Brass Railing End Post

Size Overall Height: 2-15/16" Top Diameter: 1" Height to Top of Rail: 2-5/8" Post Diameter: 3/8" Base Diameter: 1-1/4" 3 Screw holes in base Screw size: #4 x 1/2" Rod Hole: for ¼” Diameter Rod	** See: GUIDE for matching posts, rod and layout tips.** ** See bottom of page for install information.**
Matching Posts Center Post Corner Post Wall Mount Post	Brass Railing Rod 36" Brass Rod  72" Brass Rod

Brass Railing End Posts  provide a finished ending to railing. Rod inserts post just half-way. Brass Rail may sag if a longer distance, than the recommended 6” – 12” spacing between posts, is used.

Retro Post are raw unfinished - solid brass. See link above for additional information. These post can be polished and lacquered for a long lasting shine or left to age naturally. If preferred, the brass can be colored using various procedures. Although we do-not offer this option, if you search online there are various brass coloring techniques and solutions available.

Install on Wood Surface:

Attach to surface top with wood screws:

• Layout brass railing
• Cut rods to appropriate lengths
• Loosely assemble rods and posts
  
• Mark screw location and drill necessary pilot holes for brass screws
• Slip rods in place. 
• Insert brass screws through holes in base of posts. Carefully screw them down into pre drilled holes.