- Sold Each
- Material: Brass
- Finish: Polished, not lacquered
- Type: Skeleton
- Overall: 2-1/4"
- Barrel Length: 1"
- Barrel Interior: 1/8" Diameter
Timeless Brass Keys have a cut bit to turn some locks. Decorative scalloped end accents cabinets on drawers, doors, desks, boxes and chests. The excellent quality and vintage style make these solid brass keys great replacements.
These keys will turn some but not all antique locks. Key has a notched-end, known as the key-bit. If the key bit is cut correctly it will turn lock-mechanism. Key-bit profile varies according to individual lock. The key barrel is hollow, to slip onto lock pin. Lock pin must be slightly less than 1/8" for barrel to slip lock-pin.
Fitting Furniture Keys
Replacing keys for an existing lock is difficult
Before choosing a key blank:
- Key bits, also known as blades, often require a specific cut to fit a lock. Determining this cut is complex. If key bit is not cut correctly, it will not engage lock mechanism.
- Unfortunately knowing the manufacturer and model number of the lock does not help in locating a key to fit an antique lock.
- Cutting the bit/blade, to turn the lock mechanism, often requires the skills of a locksmith.
Profile of key-bit varies between locks.
- Determine lock-pin diameter This measurement is critical as key-barrel must slide over lock pin.
- The key-bit must be sized correctly to move the lock-bolt .
Selecting Keyhole Covers - EscutcheonsFor accurate fit:
- Some locks are easily turned with a simple un-notched blade
- Other locks require a key bit with one notch to lock or unlock
- Many locks require a key cut with 2 notches: one notch locks the lock the other notch unlocks the lock
- Some locks, made with spring-loaded levers, also require 2 notches however they also must be different sizes. This type of key is difficult to reproduce
- Measure keyhole height in keyhole cover
- Measure key-end height, height of key-bit
- Compare above determined measurements, to interior keyhole measurements, of the desired keyhole cover