Brass Cabinet Door Lock, 9/16 inch

Surface Locks

Lock Size Backset- Distance To Pin: 9/16" (14 mm) Overall: 1-3/16" x 2" (29 mm x 51 mm) Bolt Projection:1/4" Key Size: 2" Overall Length, Barrel: 3/16" x 1-1/2", Key-bit Height: 3/8" Keyhole-covers not-included as furniture style dictates keyhole-cover design Offered in 3 sizes, see below

Finding an exact match for an old lock is not always possible, as only a limited amount of sizes are now  made.

These Premium English Cabinet Door Locks are skillfully machined from substantial brass extrusions. Each has a 2 lever locking mechanism to ensure smooth action and years of dependable service. Strikes are not necessary and therefore not included.  Made In England. 

Cabinet Door Locks are simple to install.  Each screws directly to inside of cabinet door , no mortising is required. Reversible design: operates both left and right hand doors. Use on china cabinets, curios and furniture doors. 

More Cabinet Door Locks

• 11/16" backset Cabinet Door Locks 
• Insert Escutcheons:#0242, #0237 or #0253  can be used with this lock

Replacing Surface Locks

Keyhole location measurement is critical. Replacement lock-keyhole-location must match location of keyhole in furniture.

To measure: easiest to measure old lock, if you have it:

• Lock Keyhole Location: distance between selvedge-edge - where bolt shoots through, to lock pin. This measurement is known as the backset.
• Furniture Keyhole Cutout Location: distance between furniture-edge to estimated location of lock pin in furniture keyhole.

For help measuring and selecting full mortise locks, we recommend reading: How to select, measure and install full mortise cabinet locks.