If replacing drawer handles, check distance between holes
Premium Chippendale Drawer Pulls are sized for smaller drawers. These premium drawer pulls are beautifully made of solid brass. No need to polish, as a lasting polished and lacquered finish has been applied to keep these pull shiny for years. Swan neck bail handle is held by two posts that are permanently connected to backplate.
These Chippendale drawer pulls are authentic reproductions of colonial handles. The much used maple leaf back plate defines this classic handle. It was originally used in the late 1700's. The American colonial revival period, of the 20th century, saw a resurgence in popularity of these antique drawer pulls.
Measure Chippendale Drawer Pulls
Boring: distance between center of mounting hole to center of adjacent mounting hole.
If replacing handles: replacement-handle-boring must match actual boring measurement in drawer.
Overall Size: width and height of handle at widest point.
Attaching Chippendale Pulls
Handle attaches to drawer with two machine screws
Position handle on drawer front
Insert screws through mounting holes, from drawer interior and screw into posts
Thread size of machine screws is generally 8-32. Length supplied is determined by manufacturer. While supplied screw length is generally useful, occasionally a different size is required. Please let us know if you need a specific length. To determine the correct size: measure wood thickness and add 1/4".
I ordered the Premium Chippendale Drawer Pulls, 2-1/2 inch. This was my first order from Paxton Hardware. The delivery response time, the packaging and the product were top quality! Very happy. I highly recommend Paxton Hardware!
Chippendale Drawer Pulls
I recently ordered and installed 15 Chippendale Drawer Pulls, 2 1/2 inch, polished and lacquered brass to replace/modernize older "finger pulls". I checked countless web sites searching for the best product and I found it at Paxton Hardware. The quality of Paxton's products are the best. I received my order very fast and I appreciate the care taken to carefully protect and pack my new pulls. Very easy to install within minutes and drilling new holes was absolutely easy. I've looked at Paxton's other high quality products and I will be a returning customer.
Excellent product. Delivered on time
High quality as expected
These pulls are of very high quality, as I would expect from Paxton. They arrived on time, as I would expect from Paxton. I would only caution the buyer that the posts for the screws are attached to the face plate with small flanges. You need to allow for these when you drill your holes. Otherwise the plate will not sit flat to the drawer front. Of course, anyone using these is probably experienced enough to see that right away. But I thought I'd mention it just in case.