Gold Lamp Cords Sets, SPT-1 12 Foot

Gold Lamp Wire with Plug

• Sold as cord with plug
• Color: Transparent Gold
• Type: twin wire
• U.L., C.S.A.

• 12 ft length
• Approximate cord size: 3/16" width x 1/4" thickness
• SPT-1 Plastic insulation 0.3" 
• 18/2, 18 gauge, 105°

Lamp Cord Sets are a transparent gold color are an excellent choice for brass and gold lighting. Standard insulated 18 gauge wire has 2 parallel copper wires. The positive/hot is smooth, neutral/negative - has ribs. U.L. Listed for table & floor lamps were cord is exposed. Stripped, copper-tipped ends simplify wrapping wire around socket screws. Molded-on plugs are polarized and permanently attached to lamp cord. SPT-1 rating has traditional plastic insulation, see below.

More Gold Lamp Cord Sets

• SPT-1 8' Gold Lamp Wire
• SPT-2 12' Gold Lamp Wire
• SPT-2 8' Gold Lamp Wire with in-line switch

SPT rating designates insulation thickness:

The SPT thickness-rating provides varying degrees of resistance to heat and abrasion. Higher SPT rating numbers provide more resistance to abrasion and more protection from electric shock.

• SPT-1 has traditional, thinner plastic coating than the more recent SPT-2 lamp cord. This traditional size has been used for many years. It easily slips 1/8 IP lamp pipe. SPT-1 is often used on vintage lighting and lamps where threading common size lamp wire through pipe is difficult.

Before making any changes to electrical fixtures and/or lamps:

• Disconnect plug/wire from the electrical source.
• Turning lamp off will not protect you from electric shock.
• If you are unsure how to safely proceed contact a licensed electrician.