White Bell Lamp Shades, 10 inch base

Harp Lamp Shade

• Priced and sold each
• Material: Silk-like Shantung
• Color: White
• Fitter type: Harp

• Selection guide below
• 10" Bottom
• 5" Top
• 8" Side

White Bell Lamp Shades are a small size. They are often seen on figurine lamps. The refined bell shape makes a graceful addition to lamps.

Bell lamp shades are made of fine silk-like Shantung. The white silk provides excellent luminosity. Use for both task and room lighting. Each is finely tailored having self-piping around top - bottom and down sides. They are fully lined with satin to reflect light. These well made bell lamp shades provide lasting durability.  If more than one shade is needed please order together to insure matching fabric dye lots.

more White Bell Lamp Shades

........to fit onto a Lamp-Harp

• 8" Lamp Shade
• 12" Lamp Shade
• 14" Lamp Shade
• 16" Lamp Shade
• 20" Lamp Shade

.......more Fitter-types

• Uno Bridge Lamp Shades
• Chandelier Shade
• Clip-on Lamp Shade

Measure & Install Harp Lamp Shades

Standardized Lamp Shades Measurements

• Top: diameter across top of shade
• Bottom:  diameter across base of shade
• Side: straight measurement of the slant-side of shade

A small 1/2" ring fitter is at center top of a harp lamp shade frame. This ring sits on post at top of harp and is secured by a lamp finial. 

Guidelines for determining which Harp Lamp Shade to select.  

These generalizations apply to many lamps however personal taste should be the guiding influence. 

• Height of Lamp Shade: approximately 2/3 rds height of lamp-base. (height of lamp base: distance from bottom of lamp base to base of lamp socket)
• Bottom-diameter of Lamp Shade: approximately 1”-2” less than lamp-base height. Bottom diameter should not exceed lamp-base height. 
• 
  
• Lamp shade proportions should reflect lamp base proportions. For example: a short squat lamp will look best with a shade of similar proportions.
• Using the same lamp shade base shape, round or square, provides a cohesive appearance.
• If using incandescent light bulbs there should be a minimum of 3-1/2” between lamp shade and bulb to allow heat escape.
• If the preferred lampshade size is not available, it is normally best to choose a slightly larger rather than smaller size shade.
• Change harp height if the lampshade is sitting too high or low on the lamp.