Drop Leaf Table Hinges, 1-1/2 x 3-3/16

Drop Leaf Table Hinges are hard working steel with a fixed pin and countersunk holes. This type of vintage table hardware is seen on many old tables. Hinges are a unique reproduction style as they have a rule joint. The barrel protrudes on one side of the hinge when closed.  Hinge leaves are 2 different lengths. Each table leaf requires a pair of hinges. If needed use with drop leaf table supports.

Drop Leaf Table Hinges

• Joint Length: 1-1/2"
• Open Width: 3-3/16"
• Long Leaf Including Pin: 1-15/16"
• Short Leaf to Pin: 1-1/4"
• Screw size: #6 not included

These table hinges are steel with a yellow zinc finish.

Install Table Hardware

• The rule joint protrudes on only one side of hinge. The joint is mortised into the underside of the table top, thus enabling leaf to swing clear.
• The hinge-leaves are intentionally two lengths. The shorter hinge leaf is mortised into the underside of tabletop. The longer hinge leaf is mortised into the underside of table leaf.