Furniture Door Lock, 1/2 backset

Surface Locks

Lock Size Overall: 1" x 2" (26 mm x 51 mm) Backset-Distance To Pin: 1/2" (13 mm) Bolt Projection: 1/4" Key Size: Barrel: 3/16" Diameter, 1-3/4" Overall Length, Key-bit: 5/16" H Keyhole-covers not-included as furniture style dictates keyhole-cover design 4 sizes, see below

Finding an exact match for an old lock is not always possible, as only a limited amount of sizes are now  made.

Furniture Door Locks are a surface mount design. Easy to install as no mortising is necessary.  Lock screws to door interior. Surface Locks are double handed for use on either left or right hand doors, as bolt exits from either side of lock. 

Furniture Door Locks are brass, with a brass-plate bolt steel box and tumbler action. A strike is unnecessary, therefore not included. 

More Furniture Door Locks:

• 7/16" backset - Furniture Door Locks
• 5/8" backset - Furniture Door Locks
• 3/4" backset - Furniture Door Locks
• Insert Escutcheons:#0242,#0237 or #0253  can be used with this lock

Replacing Surface Locks

Keyhole location measurement is critical.Replacement lock-keyhole-location must match location of keyhole in furniture.

To measure: easiest to measure old lock, if you have it:

• Lock Keyhole Location: distance between selvedge-edge - where bolt shoots through, to lock pin. This measurement is known as the backset.
• Furniture Keyhole Cutout Location: distance between furniture-edge to estimated location of lock pin in furniture keyhole.

For help measuring and selecting full mortise locks, we recommend reading: How to select, measure and install full mortise cabinet locks.